Rockwool Ablative Coated Batt 60mm x 600mm x 1200mm

Description

 

ROCKWOOL Ablative Coated Batt 60mm is a mineral wool insulation pre-coated on both sides with an ablative layer, designed as part of the ROCKWOOL FirePro® fire-stopping range. It has been thoroughly tested for use in a variety of services and substrates, including solid and flexible walls, floors, multi-service penetrations, and large framed service voids. The batt offers up to 4 hours of fire resistance, along with acoustic performance, air tightness, and heat loss reduction. While not suitable as a load-bearing seal, it is easy to install, cut to size, and requires minimal cuts. ROCKWOOL Acoustic Intumescent Sealant should be applied to all cut edges to ensure proper coverage, and for certain applications, FirePro Glue® may be required. A single 50mm batt provides up to 2 hours of fire resistance, but a 60mm version is recommended for up to 4 hours of protection. The product is durable, long-lasting, and also tested for airtightness to prevent smoke passage.

 

Key Points:

1. The 50mm Ablative Coated Batt provides up to 4 hours of fire resistance and acoustic performance, with air tightness and heat loss reduction.
2. It is suitable for various installations, including walls, floors, service penetrations, and voids, but is not designed for load-bearing seals.
3. Easy to install, the batt can be cut to size, with ROCKWOOL Acoustic Intumescent Sealant applied to all cut edges; some cases may require FirePro Glue®.
4. A single 50mm batt offers up to 2 hours of fire resistance, while the 60mm batt provides up to 4 hours for more demanding applications.

 

 

 

For more in our range of insulation, click here. For more products from Rockwool, click here.

Alternatively, visit the Rockwool website here.